Netbiokem DSAM is a ready to use 2-in-1 high performance disinfectant cleaner for all hard surfaces. It provides broad spectrum disinfection in industrial, institutional, healthcare and household settings. Kills SARS-CoV-2 (COVID-19 virus) in dirty conditions (no need to pre-clean). For aircraft, it is effective for use in galleys, on trolleys, passenger seats and tablets, luggage compartments, all surfaces in lavatories and in the cabin.

Netbiokem DSAM will not harm or damage fabrics, plastic, metals, rubber or other surfaces. It has been tested against the relevant aviation material standards. It is compliant with the requirements of the Airbus Consumable Materials list and conforms to European Norms EN Standards. Hard surface disinfectant only. Do not mix with detergents or other chemicals. Not to be used on skin. Not to be used on medical devices or other therapeutic goods.

• Kills 99.99% of most harmful bacteria, fungi, mycobacteria and viruses
• TGA Approved for COVID-19 claim (ARTG No.336972)
• Ready to use 2-in-1 solution, eliminating the need for pre‑clean process
• Non-flammable and non-toxic formulation
• Suitable for all transport, commercial, industrial, health services, military and any essential services industry
• Can be applied by spray, or by microdiffusion with an Ultra Low Volume (ULV) fogging machine
• Available in 500ml, 5L, 20L, 200L and 1000L pack sizes

APPLICATION

SPRAY: Spray Netbiokem DSAM onto the surface until completely wet. Allow up to 2 minutes contact time for disinfection. Wipe the surface with a clean dry lint free cloth. Do not rinse. For heavily soiled surfaces, a second application may be required. For food contact surfaces, rinse and dry afterwards. Store below 30⁰C. Hard surface disinfectant only. Not to be used on skin. Use biocides with caution. Read the label before use. Not to be used to disinfect medical devices or other therapeutic goods.
LIQUID/WIPE: Apply Netbiokem DSAM liquid onto the wipe material until wet. Wipe and leave for up to 2 minutes to ensure complete disinfection. Wipe the surface with a clean dry lint-free cloth. It is recommended to also rinse and dry if the surfaces are in contact with food.
FOG: All fog treatments must be carried out in empty premises / areas with any air conditioning and recirculation systems switch off. Ensure all external doors are closed and any internal doors and any internal doors and small space closures are open. Positioning of static fogging equipment or movement of portable fogging equipment must be carried out to achieve a minimum dosage rate of 8mL/m3. The target particle size can range between 10µm - 50µm however for optimal performance we recommend a range between 10µm - 30µm with fogging application.